629293
19
Zoom out
Zoom in
Previous page
1/48
Next page
Installation & Programming Guide — 19
Zone options/Attributes
1. Part 1/Part 2 If a zone is programmed for Part 1, Part 2 or both, this zone will
give an alarm if activated In Part 1 or Part 2 set. For a Full Set only
zone, do not program Part 1 or Part 2.
2. ER
(Entry Route)
This zone is ignored if an entry point has activated before it. If no
activation of an entry point has occurred then an instant alarm
is activated. In Part Set 1 or 2, the ER normally starts the entry
timer. If Part 1 or Part 2 disable is programmed, if triggered the ER
will give an instant alarm if Part 1 or Part 2 have been selected.
3. 24Hr A soak zone programmed with this option turned on becomes a
permanently active zone.
4. Verification An alarm, Entry, or 24 Hr zone can be programmed as verified. If
two verified alarm zones give an alarm within the programmed
verification time, a verified alarm will be signalled. If a 24hr zone is
programmed as verified there will only be a verified output in the
set condition.
5. Omit If a zone is programmed with omit, a user can omit this zone for
one set period at a time.
6. Sounders Off If sounders off is selected for a certain zone type, then if an alarm
occurs, all sounders will not operate. However, the internal
speakers will still function with this option selected, if the zone is a
'Fire' zone. Sounders will operate in the set condition.
7. Double Knock This allows zones to be combined to give an alarm activation if
more than one zone activates within the defined time windows.
8. Output 1 or 2 If a zone is programmed as Auxiliary, it can be programmed to
trigger either Output 1 or 2 when the zone is activated. The output
will reset when the panel resets.
9. Part1/Part2 If a zone has been programmed for Part 1 or Part 2 operation,
Entry Disable programming the Part 1 or Part 2 entry disable makes the zone
instant in Part 1 or Part 2 set. This option allows an entry point to
give instant alarm in Part 1 or Part 2 set if activated and also gives
the same option to an entry route.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info