629293

Guardall WINDSOR SERIES 300i Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
Installation & Programming Guide — 17
The Control Panel must be programmed using an LCD Keypad.
When a valid programming code has been entered, the display will show the current status
of the selected option. To change the status , simply enter the new selection in the format
required for that option then press confirm to select it. If a valid selection has been
entered then a confirmation tone will be heard. If an invalid selection is entered, an error
tone will be heard.
Some programming options require a second level of programming. After the first level
status has been confirmed, the second level option/options should be selected and
confirmed in a similar manner.
If the cancel key is pressed at any time during the programming of an option, then the
changes will not be stored.
Zone Programming
Enter 001 for Zone 1, 002 for Zone 2 etc., and the current circuit type will be displayed.
The panel has 8 on board zones which can be expanded to 32 using external
concentrators . Zone programming is 001 to 008 (or 032) if expansion is being used.
At this first level, the new circuit type must be selected by pressing a key between 1 and 8.
(See Option Table 1 on page 23 for circuit type codes). The display will show the selection
e.g. etc.,
Once you have selected a circuit type, press the key to progress to level 2
programming.
At this level there are various attributes which each circuit may have. (See Option Table 1
on page 23 for attributes and codes.)
To select or deselect any attribute, simply press the relevant key. Any attributes which
have been selected will be indicated in the display. When you have selected the attributes
you require for that zone, press the confirm key to accept the selections. This returns
you to Engineer Mode.
✓
X
Programming OptionsProgramming Options
Programming OptionsProgramming Options
Programming Options
Installation & Programming
✓
ALARM ENTRY 24HR
✓
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info