Manual Guardall WINDSOR SERIES 300i (page 18 of 48) (English)

629293

Zoom out

Zoom in

1/48

18 — Installation & Programming Guide

Zone Types

Off If a zone is programmed as off, it will not operate in Full Set or

Part 1/Part 2 set. This should only be used to disable spare alarm

zones.

Alarm If a zone is programmed for alarm, it will give an audible response

if activated in the Full Set or if programmed in Part 1 or Part 2 Set.

EnEx Point This zone type is normally used for a final door or exit point. The

zone will start the entry exit time if activated. An exit point can be

programmed off in Part 1 or Part 2 and can also give an instant

alarm in Part 1 or Part 2 set.

24Hr A zone programmed for 24Hr will give an alarm if activated in either

the set or unset condition.

Fire A zone programmed for Fire will give an alarm if activated in the set

and Unset as the 24Hr zone. The fire zone when active gives

different audible output to alarm and 24Hr.

Personal Attack A zone programmed for PA will give an alarm in the set and unset

(PA) conditions.

Auxiliary A zone programmed for auxiliary will give an alarm in the set and

unset. The external sounder does not operate for auxiliary but

different tones are produced for the internal audio speakers.

Soak A zone programmed for soak will not give an audible alarm and is

used to give a test time for a zone (detector) that could be faulty.

Any zone activations are put into the log. The zone is automatically

taken off soak and reverts to its previous type and attributes if no

activations have been logged for 14 set/unset periods.

Reset A zone programmed for reset when activated, will attempt to reset

the control panel. If the reset is successful, then any impending

engineer reset requirement is removed and all local alarm indication

muted. If unsuccesful, the panel will continue to operate as normal.

Note - Alarm, Entry, Fire, PA and auxiliary alarm all have

separately identifiable transmitter (Tx) outputs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Guardall WINDSOR SERIES 300i Manual

Product: