629293
15
Zoom out
Zoom in
Previous page
1/48
Next page
Installation & Programming Guide — 15
Engineer ModeEngineer Mode
Engineer ModeEngineer Mode
Engineer Mode
Installation & Programming
ENTER NEW PIN
To enter Engineer Mode, first create a system tamper (open panel lid) and enter the
Engineer Pin Code (Default 9999). Engineer mode can be exited on completion of
programming by pressing then . The system tamper should be cleared prior to
exiting engineer mode. The following options are available from Engineer Mode.
Engineer PIN Change
Press Engineer PIN change.
Press Enter new code.
Press Re-enter the new code
as confirmation.
NOTE: if the new PIN code entered clashes with an
existing code, the display will show,
before reverting to
Event Log (Viewing)
Press Event log.
Press to scroll backwards
through the event log. (see table of event log
displays).
Press to scroll forwards through the event log. (see
table of event log displays)
Press to view the event number and the time of the
occurance
Press toggles to view any text descriptors for the event
Press to exit Event Log display at any time.
NOTE: the keypad will emit a double beep when the most recent event is reached.
✱ ✱ ✱ ✱
????
RE-ENTER PIN
✱ ✱ ✱ ✱
????
3
MOST RECENT EVENT
PIN CLASH
ENTER NEW PIN
2
X
8
9
X
9
to exit if required
X
ZONE 1 CLEAR
ENGINEER ON SITE
ZONE X ALARM
Zone Status
Press Zone status
Press to exit.
If any zones are open, the display will show
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info