747908
29
Zoom out
Zoom in
Previous page
1/48
Next page
29 / 48
S1024.mz32_V1.7_sh_en
Assign digital switches in “RF Set” step-by-step
1. Bind the receiver you wish to assign to a digital switch and verify
no other receiver is acve.
2. Switch to the submenu “RF Set” of the basic menu.
3. Select the receiver you would like to use by tapping on the blue
field which is the acve receiver.
4. By tapping the blue field with the receiver type a selecon win-
dow appears.
5. Tap the channel number for which you would like to assign a dig-
ital switch.
The tapped field is displayed inverted and a control panel is dis-
played at the boom (see le figure).
6. Use the
”- or buons to assign the desired Digital Switch
to the selected receiver channel.
- In the illustraon on the le, for example, the digital switch
“D1” is selected at the receiver connecon 14 of the receiver
(the bound receiver is a GR-32, 16 channel receiver. You can
use any HoTT receiver). Touching the check mark in the bot-
tom right confirms the selecon.
7. If necessary proceed idencally with other receiver connecons.
8. By tapping on the symbol pulse (
) you can change to level ( )
and back to pulse again.
- When the symbol pulse (
) is selected, servo pulses are out-
put to the corresponding channel output.
- When the symbol level (
) is selected, the output of the cor-
responding channel is switched to high or low.
Notes
Switching to level allows the direct connecon of transistors
or LEDs to the receiver output via a series resistor.
In Graupner receivers GR-12 (#33506), GR-16 (#33508),
GR-24 (#33512), GR-32 (#33516) and GR-24 PRO (#33583) as
well as GR-16L (#S1021), GR-24L (#S1022) and GR-32L
(#S1023) series resistors are allready installed and LEDs can
be connected directly between the orange servo pulse wire
and the brown or black “-” wire.
9. Touching “OK” completes the process. Touching “Reset resets
the receiver to the default sengs.
In both cases, the display will be closed and you will return to the
“RF Set” menu.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info