747908
28
Zoom out
Zoom in
Previous page
1/48
Next page
28 / 48
S1024.mz32_V1.7_sh_en
3. Hold the transmier at hip level at a slight distance from your
body.
4. Start the range test in the "RF Set" menu by tapping the icon in
the “Range Test” field.
The me display begins to count down and a beep will sound
throughout the enre range test.
5. Move away from the model within the given 99 seconds range
test and move the control scks while maintaining visual contact.
If you noce an interrupon in the connecon at any me
within a distance of about 50 m, try to reproduce it.
6. If possible, switch on an exisng motor, in order to addionally
check the interference resistance.
7. Carry out the extended range test before starng up your model,
simulang all the control movements occurring in pracce. In
order to guarantee a safe model operaon, the range must
always be at least 50 m on the ground.
!
CAUTION
Never start a range test on the transmier during normal model
operaon!
Digital switch
The transmier mz-32 HoTT features 64 digital switches. These can
be found in the “Special” menu and can be defined, acvated and
switched in the submenu “Digital Switch”. In addion, each of these
64 Digital Switches can be arbitrarily placed as a widget on one of
the widget pages and operated from there.
Available switching funcons are:
ON/OFF switching funcon
Pulsang switching funcon
Momentary switching funcon (0 - 10 seconds)
On the receiver side, these digital switches can be assigned to the
respecvely desired switching channel. Mapping a digital switch to
a receiver channel can be done in the “RF Set” menu or directly on
.unem IICSA weiV ataD & gnitteS yrtemeleT eht gnisu reviecer eht
Notes
This funcon is only available with receivers that have been
updated with the current firmware release.
When seng up digital switches verify that only the intended
receiver where such assignment are to be made is acve. No
other receiver should be acve.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info