Manual Graupner MZ-32 HoTT (page 26 of 48) (English)

747908

Zoom out

Zoom in

1/48

26 / 48

S1024.mz32_V1.7_sh_en

Receiver Binding

To establish a connecon with the transmier, a Graupner HoTT

receivers must ﬁrst be "bound" to at least one model memory. This

process is generally called "binding" and it needs to be repeated

each me a new receiver is installed in a model.

By default, the "binding" of a receiver is always carried out as part of

a so-called bind group. When binding an unbound model memory,

the next free bind group is automacally proposed. Each me the

proposed bind group is accepted the model will have an exclusive

bind with that group therefore, a model-speciﬁc binding takes place.

The corresponding bind ID is shown in the "Bind" column at the right

edge of the model list. Alternavely, a model memory may also be

bound "globally" or within a parcular binding group.

Bind Group

For an unbound model memory, the default is the next free binding

group. However, as long as the model memory is unbound, this spec-

iﬁcaon can be changed by tapping the icon on the “Bind Group”

ﬁeld. You can select from the following opons:

• "Global" enables the receiver to respond to the transmier sig-

nal on a non-exclusive bases. What this means is that any other

receiver that is bounds as global will respond to the transmier

signal of another model memory that was also bound as global.

This can be used in situaons where for example you have mul-

tnereffid deen ton od dna emas eht lla era taht sledom elpit

model memory sengs.

• "Group" enables the receiver to respond exclusively to the group

ID assigned during binding. For example if you

bound a receiver

to bind group A0 that receiver will not respond to a signal from

the transmier of a model memory that was bound global or for

example as group C2.

You can bind another model memory also under bind group C2

which will result in one model memory sharing two receivers

under a single bind. What it will do is when both receivers are

turned on they will respond simultaneously to the same control

inputs of the transmier.

The use case for this is for example during compeon when one

airplane becomes inoperave and you would like to connue the

contest using an idencal airplane without switching model

memories on your transmier to avoid losing me. All you need

to do is power the other airplane and wait for the receiver to

establish the bind

Note

You can view the associated bind group belonging to a memory

model in the "Bind" column on the right-hand edge of the "Model

List" submenu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MZ-32 HoTT Manual

Product: