747908
27
Zoom out
Zoom in
Previous page
1/48
Next page
27 / 48
S1024.mz32_V1.7_sh_en
Aenon
If you tap on the bind group bind number ID in the “RF Setmenu
the transmier will release the bind from the acve model memory
provided that RF is switched o.
Binding procedure step-by-step
1. Move transmier and receiver at a moderate distance from each
other (30cm or 1).
2. Switch on the mz-32 HoTT transmier without switching on the
RF or set the RF Transmission to "OFF" in the "RF Set" field of the
"RF Set" menu.
3. Switch the receiver power system on.
4. Put the receiver in bind mode according to its manual.
5. In the transmier display, touch the desired value field "RX1 ...
RX4" in the "Bind" column to enable the transmier-side binding
process.
If the bind was successful you will noce in the Rx column of the
transmier the number of receiver channels for example R6, R12
with a highlighted blue background and the LED on the receiver will
change its color or state.
In case of an unsuccessful bind chang
e the posions of the devices
and repeat the enre procedure.
Delete exisng binding step-by-step
1. Switch on the mz-32 HoTT transmier without switching on the
RF or set the RF Transmission to “OFF” in the “RF Setfield of the
“RF Set” menu.
2. In the transmier display, touch the desired value field "RX1 ...
RX4" in the "Bind" column to trigger a transmier-side binding
process. The exisng binding is deleted in the course of the bind-
ing aempt (receiver has to be switched off for removing the
bind)
Range test
When the range test starts, the output of the transmier decreases
significantly. A praccal funconal test can therefore be performed
at a distance of less than 100 m. Aer the the end of the range test,
the transmier switches back to full output power and the range
test signal t
one stops.
If necessary ask someone for help.
Range test step-by-step
1. Verify that the receiver and transmier are communicang prop-
erly and that all control surfaces are funconal.
2. Place the model on a flat surface (cement, mowed lawn or ground)
with the receiver antenna at least 15 cm above ground.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info