747908
30
Zoom out
Zoom in
Previous page
1/48
Next page
30 / 48
S1024.mz32_V1.7_sh_en
Assign Digital Switches to a widget step-by-step
1. Switch to the submenu “Digital Switch”.
2. Tap on the first Acticon to acvate the Digital Switch and select
the desired mode (On/O, Pulse or Flash).
3. Connect for example a servo to the channel you designated as
Digital Switch.
4. Go to the Home page and select an empty deck or available block
an bring up the Widget Editor.
5. Select the “Digital Switch” widget and tap on DS1 which is the
widget we assigned in the previous step.
6. Test the operaon by tapping on the buon. You can change its
behavior in the “Digital Switch” submenu.
Seng control and mixer characteriscs
Both the control characteriscs in the submenu „control seng“ of
the basic menu as well as virtually all mixer characteriscs are set
essenally according to the same principles. The corresponding pro-
cedure is shown below with reference to the throle curve.
However, the sengs shown have a purely demonstrave character
and in no way correspond to real throle characteriscs!
Select characterisc curve step-by-step
1. Enter the desired submenu.
Here is an example of the submenu “control seng.
2. In the desired line touch the symbol
in the “Detail” column.
Here is an example of the control funcon Throle.
The display shown on the le will be displayed.
3. Touch the “Other” field in the upper right corner.
The display shown on the le will be displayed.
4. Touch the bright selecon field to the right of “Curve type”.
In rotaon procedure, select the desired curve type or the desired
control characterisc. The choices are:
- A linear characterisc without points between the endpoints.
This characterisc corresponds to the standard seng.
- A linear characterisc with 5 points evenly distributed between
the endpoints.
This characterisc is to be selected as the basis of non-linear
characteriscs.
- A horizontal curve with a single point in the middle of the con-
trol.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info