747908
31
Zoom out
Zoom in
Previous page
1/48
Next page
31 / 48
S1024.mz32_V1.7_sh_en
The horizontal characterisc curve can only be moved ver-
cally and thus used, for example, as the basis for speed spec-
ificaons for speed controllers.
5. If necessary, boom right, in the field to the right of “Spline”,
select whether the characterisc should be “square” or “rounded”.
Set characterisc curve step-by-step
1. Change to the display page “Value”.
2. Bring the vercal green line to the desired point with the relevant
sensor, in the example with the throle control sck.
The approached point is displayed in red and on the right the
number of the point as well as its coordinates are shown as well
as yellow rectangles at the lower and le display edge.
3. The selected point can now be moved either horizontally or ver-
cally, and that ...
... either by tapping the symbols
in increments of
0.1%.
or by moving the respecve yellow rectangle horizontally or
vercally with a fingerp or a stylus suitable for touch screens.
Touching the icon
resets the value of the selected line back
to the default value.
Add point step-by-step
1. Use the relevant control to move the vercal green line between
two points.
As soon as the symbol
is visible on the right edge of the display,
another point can be set by tapping the symbol. Up to three more
points are possible.
2. If necessary adjust the posion of the added point as described
above.
3. If necessary proceed idencally with further points.
Delete point step by step
1. Use the relevant control to move the vercal green line to the
point to be deleted.
The selected point is displayed in red and the top right shows the
number of the point and the symbol
to the right.
2. Touching the icon deletes the selected point.
In the picture on the le this would be point 3, for example.
3. If necessary proceed idencally with further points.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info