467111

Graupner MC 32 HOTT Manual

96
Zoom out
Zoom in
Previous page
1/345
Next page
96 Program description - Base setup models | Helicopter models
EXT. (PPM signal at DSC sock-
et)
If your transmitter is fitted with a non-Graupner exter-
nal RF module connected to the DSC / Data socket,
you can switch between the standard internal HoTT
RF module and the external module when you switch
model memories in the “Module” line by choosing
either “HoTT”, “EXT.”, or “SP.”, as described in the fol-
lowing section.
You can now use the arrow button of the right-hand
four-way button to move to the first Value field in the
“Module” line before pressing the central SET button
of the right-hand four-way button:
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
HoTT
BD1 BD2 BD3 BD4
bind bind n/a n/a
In the active Value field you should now use the Se-
lect buttons to choose “EXT.” or – if appropriate – the
“SP.” mode (described below) instead of “HoTT”.
When you select “EXT.”, the HoTT-specific value fields
are replaced by the modulation type already selected
in the “DSC output” line; see page 89:
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
PPM10
EXT. PPM
#01 0:00h
Stop watch
Flight time
K78
0:00.0
4.1V
0:00.0
RX VOLT:0.0v
00
0
0
00:00h
M
V
SP
Graubele
H-J Sandbrunner
“Mode” column
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
In this column you select the transmission mode of
the external RF module:
• Mode “1”: 2-channel hopping
• Mode “2”: x-channel hopping
“BIND” column
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
The “BIND” column in the right-hand column can be
used to initiate the “Bind” process of the non-Graup-
ner system – the transmitter’s RF section must be
switched off when the transmitter is rst switched
on.
The lines of the “Receiver output” and “Range test”
options (described below) are also suppressed, as
are all the HoTT-specific displays in the base display;
“PPM” is also superimposed instead of “HoTT”:
#01 0:00h
Stop watch
Flight time
K78
0:00.0
4.1V
0:00.0
RX VOLT:0.0v
00
0
0
00:00h
M
V
PPM
Graubele
H-J Sandbrunner
SP mode (Digital signal at DSC socket)
If you need for external RF module from another
manufacturer, or however, instead of the analog PPM
signal a special digital signal, then connect it to the
DATA jack and select the line “module” to “SP Mode”:
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
Also include here the choice by pressing the central
SET key of the right or the centre ESC key of the left
touch pad.
Parallel to this choice are also the options described
below “Receiver output” and “Range Test” and hidden
all HoTT-specific displays in the basic display and
instead of “HoTT”, “SP” is displayed:
… 96 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info