Manual Graupner MC 32 HOTT (page 97 of 345) (English)

467111

Zoom out

Zoom in

1/345

Program description - Base setup models | Helicopter models

Important notes:

• The output voltage of the DATA

socket is around 5 V, and must be

reduced to the power supply

voltage generally required by external

digital RF modules (3 to max. 3.3 V). This

is accomplished using the circuit which

is shown here in diagrammatic form:

GND

Vcc IN = 5 V

DATA +

DATA S 125000 baud signal

Vcc

GND

DATA -

22µF/6.3 V 22µF/6.3 V

Vcc OUT = 3 ... 3.3 V

Low Drop

Voltage

Regulator SP.-MODULE

with

digital input signal

• Servo travels must be limited to max.

128 %.

SP channels

Note:

This menu line is suppressed in the “Module”

line if you select “HoTT” or “EXT.”.

If necessary, use the Select buttons  of the left or

right-hand four-way button to move to the “SP chan-

nels” line, then brieﬂy press the central SET button of

the right-hand four-way button to activate the Value

window:

Stick mode 1

BASIC SETTING,MODEL

Info

Module

1234g/111111

SEL

bind

SP module

SP channels 6

You can now select “6” or “8” channels using the right-

hand Select buttons. The procedure is concluded by

again pressing the central SET button of the right-

hand four-way button.

At the transmitter this selection only affects the num-

ber of control channels transferred to the external RF

module via the DATA socket. If you choose “6”, then

these are control channels 1 … 6; if you choose “8”,

these are channels 1 … 8.

Simultaneously pressing the  or  buttons of

the right-hand four-way button (CLEAR) returns the

display to “6”.

ext. PPM signal

Note:

This menu bar is hidden when “hott” in the

line “module”.

Stick mode 1

BASIC SETTING,MODEL

Info

Module

1234g/111111

SEL

PPM10

EXT. PPM

ext. PPM Signal normal

Some RF modules which can be connected to the

external (page 27) or internal, page 29, connectors

for other RF modules require an inverted input signal.

Observe, however, the installation

instructions of the relevant module.

The choice of “inverted” instead of the default preset

“normal” allows for appropriate adaptation of the pro-

vided PPM signal.

A simultaneous tap on the  or  keys of the

right touch pad (CLEAR) will reset the display to

“normal”.

Receiver channel mapping

Note:

This menu line is when “EXT. PPM“ or ”SP

mode“ in the line ”module“ hidden.

As long as there is at least one “bound” HoTT receiv-

er in the “Module” line, the next line down will be the

“Rcv Ch map” line.

Model name

Stick mode 1

BASIC SETTING,MODEL

Info

Graubele

1234g/111111

SET SET SET SET

Rcv Ch map R16 R08 n/a

n/a

As mentioned in the introduction to the “Binding receiv-

ers” section, this menu item of the mc-32 HoTT

offers both the opportunity to freely divide up the trans-

mitter’s control channels within a receiver as well as

the opportunity to distribute the transmitter’s 16 control

channels across as many as four receivers. This re-

distribution is subsequently referred to as “mapping”

or “channel mapping” (channel correlation). Select the

receiver to be “mapped” with the selection keys of the

left or right touch pad then tap brieﬂy on the centre

SET key of the right touch pad.

Channel mapping within a receiver

Analogous to the channel correlation function in

the »Telemetry« menu on page 249, described as

“Channel Mapping”, it is very simple to use this menu

item to freely assign the transmitter’s control channels

present on the receiver’s inputs to any speciﬁc receiv-

er outputs (servo connections) for the bound receiver

designated by the column labelled BD1.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC 32 HOTT Manual

Product: