Manual Gloria Multibrush SpeedControl (page 27 of 56) (English, German, Dutch, French)

725140

Zoom out

Zoom in

1/56

locked when the locking device

independently returns to its original

posi tion .

Disassembly of joint brush followed

by assembly of the surface brush

Dismantle the joint brush according to

handling and function described above.

Open the locking device (K) of the

drive arm (P) and, with the lock

applied, (K) put the drive arm (P) with

safety guard (O), onto the drive side of

the motor/gear unit (L), as illustrated.

Release the spring-loaded lock (K),

the drive arm is locked when the

locking device independently returns

to its original position .

NOTE!

If the drive unit (P) cannot be pushed

onto the drive shaft, reach under the

safety guard (O) and turn the hexago-

nal drive until the drive unit (P) slides

onto the drive shaft easily and without

force.

Put the surface brush (N) onto the

hexagonal drive and then the guide

arm (M), as illustrated, on the steering

side of the motor/gear unit (L).

Now slide the lock (K) into open posi-

tion , hold this and press the guide

arm (M) further onto the coupling

shaft up to the stop. Release the

spring-loaded locking device (K).

The guide arm (M) is locked when the

locking device independently returns

to its original position .

NOTE!

Whilst assembling the surface brush,

make sure that the side part of the

safety guard on guide arm (M) is

firmly connected to the safety guard

and is correctly sealed.

6.1.3 Using the surface brush on

rough surface structures e.g. tiles,

paving slabs, exposed aggregate

concrete, stoneware etc.

Figure 21

Place the switched-on device parallel

on the surface to be treated. Hold the

device at working angle and make

sure that the rubber lip on the safety

guard is just above the ground.

Walk at an even steady pace and push

the device in front of you.

Depending on the degree of soiling,

apply light to medium pressure on the

surface brush, adapt your pace of

work to the degree of soiling.

NOTE!

! Always work parallel and hold the

device away from your body.

! When working close to edges, the

narrower side of the device should

point towards the wall.

! In cases of stubborn dirt you can move

the device backwards and forwards on

the spot (like a scrubber), until the

required result is achieved.

! Moist cleaning is also possible in cases

of heavy soiling.

Use a sprayer to moist the surface to

be cleaned with water or a cleaning

agent, a GLORIA sprayer is ideal for this

purpose.

After moit cleaning rinse the surface

with water.

RZ_MULTIBRUSH_DE_GB_FR_NL_978410-1_Text_GB 10.11.16 15:55 Seite 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gloria Multibrush SpeedControl in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gloria Multibrush SpeedControl Manual

Product: