725140
29
Zoom out
Zoom in
Previous page
1/56
Next page
29
GB
Open the locking device (K) of
the joint brush unit (J), as shown in
the illustration, and remove the joint
brush unit.
Unscrew the hexagon socket screw
2-3 turns so far out of the joint brush
housing, until safety guard (H) can
easily be twisted and pulled off.
Now press lock button (Q) which
blocks the drive shaft and unscrew the
hexagon socket screw, which fixes the
joint brush (J), from the drive shaft
().
Remove the disc from the joint brush.
ATTENTION! Improper use of the
device poses a risk of damage to
property!
You should therefore observe the
following safety instruction:
! Never activate the lock button (Q)
when the joint brush is running.
Pull the joint brush (J) from the flange
on the shaft and exchange it for a new
one.
Assembly is carried out in reverse
order ( ).
! After maintenance or cleaning ensure
that all screws, bolts, nuts and safety
devices are secure and assembled.
7 Decommissioning
& Storage
7.1 Decommissioning
Figure 30
! Take the device out of operation by
releasing the ON/OFF safety switch (D)
in the handle.
! Disconnect the device from the power
supply.
CAUTION! RISK OF INJURY FROM
RUNNING BRUSHING TOOL!
! Never lift the device off the ground
whilst switching it off as there is
danger of entanglement!
Do not put the device down on the
brush during work breaks or after use
as this will damage the bristles.
Always hang the device up or lie it
down as shown in the illustration.
7.2 Storage
CAUTION! You may be exposed to
hazards that could injure you
when handling the device.
You must therefore store the
device away from children.
!Remove any dirt and debris.
!Store the device hung up, dry and
protected from frost.
8 Maintenance & Cleaning
CAUTION! RISK OF BURNS
CAUSED BY HOT PARTS!
During assembly or conversion work
the drive parts of the device or
components can still be very hot and
may cause burns. It is therefore
important to observe the following
safety instruction:
! Wear protective gloves during
maintenance and cleaning!
8.1 Cleaning
WARNING! RISK OF DEATH
DUE TO ELECTRIC SHOCK!
If the energised device comes into
contact with water, there is a risk of
seri ous injury or death!
25
26
27
28
29
30
RZ_MULTIBRUSH_DE_GB_FR_NL_978410-1_Text_GB 10.11.16 15:55 Seite 29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gloria Multibrush SpeedControl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gloria Multibrush SpeedControl in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info