714651

Gastroback 40983 Manual

71
Zoom out
Zoom in
Previous page
1/80
Next page
71
Problem Reason The Solution
The wire tool does not
fit into the tool coupling of
the motor unit
AND/OR
you cannot engage the
wire tool correctly in
the tool coupling.
To avoid wrong installati-
on, the shaft end of one
of a matched pair of wire
tools is shaped to fit only
in one of the tool coup-
lings in the motor unit.
Simply try the other tool coupling.
You attempted to mix up
the wire tools.
Only use one matched pair of wire tools at a time. Do
not attempt to operate the appliance with wire tools
installed that does not fit to each other.
The bar blender or chopper
system is installed already
at the motor unit.
For your safety, it is not possible to mix up the accessori-
es. First remove the bar blender or remove the motor unit
from the chopper lid. Then try again.
You cannot install the bar
blender or chopper
system.
Wire tools are installed
already at the motor unit.
For your safety, it is not possible to mix up the accessori-
es. First remove the wire tools. Then try again.
Chopper system: You
cannot lock the chopper lid
at the chopper container.
The chopper lid is not in
correct orientation.
Turn the chopper lid until it settles down. Then turn the
chopper lid clockwise to lock it to the chopper container.
The chopper knife is not
inserted correctly in the
chopper container.
The chopper knife must stand upright in the chopper con-
tainer, with the coupling facing upwards. Always place
the chopper knife into the chopper container, before fil-
ling in your food.
Foreign objects or food-
stuffs are caught on the
upper rim of the chopper
container and/or the drive
coupling of the chopper
knife.
Always remove any food from the top of the chopper
knife and the rim of the chopper container, before assem-
bling the chopper lid. During filling, you may protect the
drive coupling of the chopper knife via a small glass or
beaker, but do not forget to remove the object, before
assembling the chopper lid (see: ‘Tips for Best Results’).
The motor is operating
noticeably slow
OR
the motor stops unex-
pectedly during operation.
May be, you cannot start
the motor again.
The mixture is too heavy.
- Wire tools: increase the speed. Try another accessory
(e.g. the dough hooks).
- Add some liquid to make your food more runny.
- Reduce the amount of food in the mixing bowl and pro-
cess your food in portions.
- Please consider that the appliance is not suited for
processing very heavy mixtures like bread dough (see:
‘Properties of Your New Hand Mixer’).
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40983 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info