Manual Gastroback 40983 (page 73 of 80) (English, German)

714651

Zoom out

Zoom in

1/80

CARE AND CLEANING

WARNING: Always ensure that all parts of the appliance are out of reach

of young children. Always switch OFF (slide the speed selector to “0”) and unplug

the motor unit, before cleaning the appliance and when the appliance is not in use.

The blades of the bar blender and chopper knife are very sharp. Always take special

care when handling the chopper system and/or bar blender to avoid injuries. Do

not spill or pour any liquids on or in the motor unit or power cord. Do not place

or immerse the motor unit or power cord in any liquids to avoid electric shock,

risk of fire, and damage.

Do not expose the containers of the appliance to temperatures above 60°C.

Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving

agents) for cleaning the appliance or any part of it, to avoid damage to the surfaces.

Do not use any hard or sharp-edged objects for cleaning (e.g. metal scoring pads,

knives, metal scrapers). Do not use violence.

DO NOT place the motor unit or power cord in an automatic dishwasher!

Cleaning the accessories in an automatic dishwasher is not recommended.

CLEANING IMMEDIATELY AFTER USE

Important: The following procedure may be used for any of the wire tools (beater,

dough hook, and whisk) and for the bar blender only. Do not use this procedure

for cleaning the chopper system, because the chopper system is not suited for

processing liquids! The chopper system must be cleaned according to the instruc-

tions in section ‘Cleaning the Chopper System’.

WARNING: The appliance is not suited for processing hot liquids! The tem-

perature of the dishwater use for cleaning may not exceed 60°C to avoid dama-

ge and risk of electric shock.

1. Use a sufficiently large, high walled mixing container (e.g. the blender contai-

ner) and fill the container with warm dishwater (max. 60°C).

2. If required, use a rubber spatula to scrape off any larger amounts of food (e.g.

residues of fibres or heavy dough) from the wire tools.

3. Install the used tool (wire tool or bar blender) at the motor unit. Ensure that the

speed selector is set to “0” and plug in the motor unit (see: ‘Operation’).

4. Immerse the accessory into the dishwater, leaving at least 5 cm (2 inches) of free space

to the motor unit. The bar blender must touch the bottom of the mixing container.

Let the motor operate for a few seconds (see: ‘Cleaning Immediately after Use’).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40983 Manual

Product: