Manual Gastroback 40983 (page 74 of 80) (English, German)

714651

Zoom out

Zoom in

1/80

5. Switch OFF (speed selector to “0”) and unplug the motor unit. Remove the acces-

sory from the motor unit (see: ‘Processing via the Wire Tools’ or ‘Using the Bar

Blender’).

6. Wipe the shaft of the accessories for cleaning. Then rinse thoroughly with clear

water.

7. Check, if there are any residues of food sticking to the accessory. If required,

clean the accessory via the following sections.

8. Dry the accessories thoroughly and leave them dry naturally for approx. 1/2

hours, where they are out of reach of young children.

REMOVING STUBBORN RESIDUES FROM THE WIRE TOOLS

CAUTION: Do not attempt to perform the following procedures with the wire

tools still assembled to the motor unit.

1. Remove the wire tools from the motor unit (see: ‘Processing via the Wire Tools’).

2. Soak the wire tools in warm dishwater for approx. 5 -10 minutes. Thereafter,

wash the wire tools with a soft cloth. Rinse with clear water and dry thoroughly.

3. Leave the wire tools dry naturally for approx. 1/2 hour where they are out of

reach of young children.

THOROUGH CLEANING OF THE BAR BLENDER

WARNING: The blades of the bar blender are very sharp. Use extreme cau-

tion when working in the area of the blades to avoid injuries and damage.

Note

When cleaning the bar blender immediately after processing runny food, the pro-

cedure described above may do (see: ‘Cleaning Immediately after Use’). With

stubborn residues of glutinous food and fibres still sticking to the surfaces of the

bar blender, proceed as follows.

1. Ensure that the motor unit is switched OFF (speed selector at position “0”), and

unplugged. Remove the bar blender from the motor unit (see: ‘Using the Bar

Blender’).

2. Then soak the bar blender in warm dishwater for 5 -10 minutes.

3. Brush the bar blender using a soft nylon brush to remove any residues of food.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40983 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 40983 Manual

Product: