566460
52
Zoom out
Zoom in
Previous page
1/94
Next page
52
appears on screen.
4) The LCD screen will contain the pitch curve point indication (left side of screen), as well as the current
pitch curve value, expressed as a percentage of travel, on the right side of the display.
Note: Point 1 is shown initially which is throttle stick all the way downward (slow)
position. Point 5 is throttle stick all the way upward (hi) position.
Press the DATA INPUT lever upward to increase the percentage of servo travel for
the respective point on the pitch curve. Press the DATA INPUT lever downward to
decrease the percentage of servo travel for the respective point on the pitch curve.
5) Press the SELECT button one time to bring up the point two (2) pitch curve adjustments. Again, use the
DATA INPUT lever to adjust the values accordingly.
6) Repeat the previous steps to set the normal pitch curve point values for the remaining three (3) points.
7) Press and hold the END button to exit the programming mode.
Throttle hold function (HOLD)- (HELI only)-
Throttle hold function is typically used for autorotations where only pitch control is used to make a descent




Note: The collective servo remains active to allow for pitch inputs during the descent of the helicopter.
To set the throttle hold:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible double beep will be heard
and the default screen will change accordingly.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the throttle hold (HOLD) menu
appears on screen.
        
INH. Activate the throttle hold by pressing and holding the DATA INPUT lever upward. The INH should
52


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info