566460
54
Zoom out
Zoom in
Previous page
1/94
Next page
54
6) Press the SELECT button to bring up the point two (2) pitch curve adjustments. Again, use the DATA
INPUT lever to adjust the values accordingly.
7) Repeat the steps above as desired for the remaining three points on the pitch curve.
8) Press and hold the END button to exit the programming mode.
Revolution Mixing (REVO) - (HELI only)

pitch inputs. This mixing assists in compensating for the rotation of the helicopter caused by the increased
torque. The T6J transmitter allows for a high rate and a low rate adjustment for the revolution mixing.
Note: If using a heading hold/AVCS gyro, only use the revolution mixing when this gyro is in the normal
mode. Do NOT use revolution mixing with a heading hold/AVCS gyro when it is in the heading-hold/AVCS
mode.
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the revolution mixing (REVO) menu
appears on screen.
4) The right side of the LCD should indicate that the revolution mixing is inhibited,
as denoted by the flashing INH. Activate the revolution mixing by pressing and
     
prior to changing to ON.
5) Push the SELECT key to bring up the low rate (as indicated by the down arrow on
the left side of the LCD screen).
6) To adjust the value, press the DATA INPUT lever either upward or downward until
the desired value is achieved.
7) Press the SELECT key once again to access the revo mixing adjustments for the high side. The up arrow
on the left side of the screen indicates that it is the high side that will be adjusted.
8) To adjust the value, press the DATA INPUT lever either upward or downward until the desired value is
achieved.
54


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info