566460
53
Zoom out
Zoom in
Previous page
1/94
Next page
53

5) Push the SELECT key to bring up the throttle hold adjustment screen.

to engage the throttle hold. Press the DATA INPUT lever upward or downward to
adjust the throttle hold function accordingly.
7) Press and hold the END button to exit the programming mode.
Pitch Curve Hold (H-PI)- (HELI only)

is activated when the throttle hold switch is enabled. This allows the pilot to have complete control of the
blade pitch during a non-powered descent. The pitch curve for throttle hold can be adjusted from 0-100% for

Generally speaking, the pitch curve should be set up so that:
Point 1- the collective servo is at the desired lowest point with the throttle stick at the lowest (bottom)
position. This is also full negative pitch.
Point 2- the collective servo is at the desired point with the throttle stick is advanced ¼ of the way.
Point 3- the collective servo is at the desired point with the throttle stick advanced ½ way.
Point 4- the collective servo is at the desired point with the throttle stick advanced ¾ of the way.
Point 5- the collective servo is at the desired point with the throttle servo fully advanced. This is full
positive pitch.
To set the throttle hold pitch curve:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible double beep will be heard
and the default screen will change accordingly.
3) Press either the MODE key OR the END key to scroll through the function menus. Continue pressing the
MODE or END key until the hold pitch curve (H-PI) menu appears on screen.
4) This will bring up point one (1) of the hovering pitch curve programming. The
current value is expressed, in percentage of the overall pitch travel, in the lower right
portion of the LCD.
5) Press the DATA INPUT lever upward to increase the percentage of the collective
servo travel for the respective point on the pitch curve.
53


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info