566460

Futaba T6J - 2.4GHz Manual

51
Zoom out
Zoom in
Previous page
1/94
Next page
51
Note: As with all switch selection availability, if the modeler has programmed any other functionality to this
switch selection, the idle up throttle curve and the other function will be activated simultaneously. As such, it
is imperative to ensure that these desired functions will not negatively impact one another.
For example, if the modeler has programmed Switch B to activate the low rates, and then selected Switch B
as the activation switch for the idle up curves, moving Switch B will activate both functions simultaneously.
Note: if the trainer function is activated, the switch C is allocated for the trainer function automatically.
9) Press and hold the END button to exit the programming mode.
Pitch Curve Idle UP (I-PI) - (HELI only)




A 5-point pitch curve is utilized to best match the blade collective pitch to the engine RPM for consistent
load on the engine. The curve can be adjusted from 0-100% each point. Idle up creates a curve typically

even when the stick is pulled all the way back. This is one of the functions that makes the maneuvers such as



Point 1- the collective servo is at the desired lowest point with the throttle stick at the lowest (bottom)
position. This is normally full negative pitch.
Point 2- the collective servo is at the desired point with the throttle stick is advanced ¼ of the way.
Point 3- the collective servo is at the desired point with the throttle stick advanced ½ way.
Point 4- the collective servo is at the desired point with the throttle stick advanced ¾ of the way.
Point 5- the collective servo is at the desired point with the throttle stick fully advanced. This is full positive
pitch.
To set the idle up pitch curve:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible
double beep will be heard and the default screen will change accordingly.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the idle up pitch curve (I-PI) menu
… 51 …


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info