566460
50
Zoom out
Zoom in
Previous page
1/94
Next page
50

Point 1 is shown initially which is throttle stick all the way downward (slow) position.
Point 2 is the throttle stick approximately ¼ of the way advanced.
Point 3 is the throttle stick approximately ½ of the way advanced.
Point 4 is the throttle stick approximately 3/4 of the way advanced.
Point 5 is throttle stick all the way upward (hi) position.
To set the idle up throttle curve:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible double beep will be heard
and the default screen will change accordingly.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the idle up throttle curve (I-TH)
menu appears on screen.


although depending upon the position of the idle up switch, it may not be on.
5) Push the SELECT key. The LCD screen will contain the throttle curve point
indication (left side of screen), as well as the current throttle curve value, expressed
as a percentage of travel, on the right side of the display.
Note: Point 1 is shown initially which is throttle stick all the way downward (slow)
position. Point 5 is throttle stick all the way upward (hi) position.
Press the DATA INPUT lever upward to increase the percentage of servo travel
for the respective point on the throttle curve. Press the DATA INPUT lever downward to decrease the
percentage of servo travel for the respective point on the throttle curve.
6) Press the SELECT button one time to bring up the point two (2) throttle curve adjustments. Again, use the
DATA INPUT lever to adjust the values accordingly.
7) Repeat the previous steps to set the idle up throttle curve point values for the remaining three (3) points.
8) Press the DATA INPUT lever either upward or downward to select Switch A, B or C as the idle up
activation switch.
50


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info