Manual Futaba T6J - 2.4GHz (page 48 of 94) (English)

566460

Zoom out

Zoom in

1/94

3) Press either the MODE key OR the END key to scroll through the function menus.

Continue pressing the MODE or END key until the normal throttle curve (N-TH)

menu appears on screen.

4) The LCD screen will contain the throttle curve point indication (left side of screen),

as well as the current throttle curve value, expressed as a percentage of travel, on the right side of the

display.

Note: Point 1 is shown initially which is throttle stick all the way downward (slow) position. Point 5 is

throttle stick all the way upward (hi) position.

Press the DATA INPUT lever upward to increase the percentage of servo travel for the respective point on

the throttle curve. Press the DATA INPUT lever downward to decrease the percentage of servo travel for

the respective point on the throttle curve.

5) Press the SELECT button one time to bring up the point two (2) throttle curve adjustments. Again, use the

DATA INPUT lever to adjust the values accordingly.

6) Repeat the previous steps to set the normal throttle curve point values for the remaining three (3) points.

7) Press and hold the END button to exit the programming mode.

Normal pitch curve (N-PI)-(HELI only)-





This curve is utilized to best match the blade collective pitch to the engine RPM for consistent load on the

engine. Pitch curve can be adjusted from 0-100% each point. This normal pitch curve creates a basic curve

for hovering. Use this function together with the normal throttle curve to obtain the performance you desire.

While each helicopter manufacturer will have specific recommendations for your flying style, generally

speaking, the points should be adjusted as follows:

 Point 1- the collective servo is at the desired lowest point with the throttle stick at the lowest (bottom)

position.

 Point 2- the collective servo is at the desired point with the throttle stick is advanced ¼ of the way.

 Point 3- the collective servo is at the desired point with the throttle stick advanced ½ way.

 Point 4- the collective servo is at the desired point with the throttle stick advanced ¾ of the way.

 Point 5- the collective servo is at the desired point with the throttle servo fully advanced.

Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba T6J - 2.4GHz Manual

Product: