566460
46
Zoom out
Zoom in
Previous page
1/94
Next page
46
The switch that controls the throttle curve, as described previously, will also control the pitch curve as well.
                 

a switch.
“Normal” Mode:
Idle-Up” Mode: Allows you to reverse the thrust of the propeller. When you have your throttle stick in the
center position (0% throttle) you will not have any pitch. As you push the stick forward (100% throttle) you
get positive pitch which allows the airplane to move forward. When you pull the throttle stick back (–100%
throttle) it applies negative pitch to the blades and allows the plane to go in reverse.
For information on the proper pitch and throttle curves, please refer to the instructions that accompanied the
variable pitch equipment.
To set the pitch curve (P-CV):
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the pitch curve (P-CV) menu
appears on screen.
4) The right side of the LCD should indicate that the pitch curve is inhibited, as
denoted by the flashing INH. Activate the pitch curve by pressing and holding
        
changing to ON.
Note: It is imperative to activate the throttle curve before programming the pitch
curve. If the throttle curve has not been activated, the pitch curve will not be
accessible.
5) Press the SELECT button two (2) times. This will bring up point one (1) of the
pitch curve programming. The current value is expressed, in percentage of the
overall throttle travel, in the lower right portion of the LCD.
6) Press the DATA INPUT lever upward to increase the percentage of servo travel for the respective point on
the pitch curve.
46


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info