30094

Futaba FP8SSAP Manual

33
Zoom out
Zoom in
Previous page
1/44
Next page
ADJUSTMENTS AND FLIGHT TECHNIQUES
•FLAP TRIM FUNCTION
FLAP TRIM
18] Knob 6 throw selector. In the
NORM position, wide throw is
selected and in the TRIM position,
narrow throw is selected.
Fig.
52
• Flap Neutral can be adjusted during flight using
the CH6 Flap Knob 6
•This
is
helpful in making
pitch
axis
trim
adjust-
ments for knife edge and vertical maneuvers.
•This
function
can
be
used
whether
Mixing
Switches 10 and 12 are ON or OFF.
• Flap Switch 18 on the trimmer panel can be set
to TRIM position to provide a finer adjustment
if desired. (This may not be possible however, if
wider angles are needed for other flap func-
tions.)
NORM position
TRIM position
Fig.
53
AUTOMATIC AIR BRAKING (THROTTLE LEVER OPERATION)
•This
feature
permits automatic deployment
of
the airbrake (flaps and elevator or flaps, spoilers,
and elevator) as the throttle lever is lowered.
When the throttle is again moved to HIGH, the
airbrakes are retracted automatically. Operation
in this manner is very efficient as it allows the
use of the airbrake function while leaving the
pilot
free
to
concentrate on the primary con-
trols.
1.Set Switch [32] to INHIB and Switch [33]] to
ACT. Monitor Lamp B comes on.
2.Set Control Switch 11 to ON. Lamp (B) blinks.
3.Trimmer 8 is used to set the throttle lever
position at which the airbrake is deployed.
Deployment at one or two stops from the maxi-
mum Slow position is usually the most suitable.
4.The
Auto
Airbrake
function
can
be
turned ON
and OFF in flight by using Control Switch 11.
• The Automatic Air Brake Function is very useful
for slowing the aircraft during maneuvers and
landing approaches. When executing a "go
around" for a missed approach, the airbrake will
be immediately released as the throttle is moved
to HIGH.
Fig.
54
31
Adjust with trimmer[8] so
the spoiler and flaps or the
flaps and elevator are lowered
within this range.
Fig.
55
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info