Manual Futaba FP8SSAP (page 42 of 44) (English)

30094

Zoom out

Zoom in

1/44

•SPLINED HORNS

This horn permits shifting of the

servo neutral position at the servo

horn. Setting and shifting the

neutral position

a) Angle divisions

Fig. 81

1) The splined horn has 25 seg-

ments. The amount of change per

segment is; 360: 25=14.4°

The minimum adjustable angle

determined by the number of

arms or number of the holes. For

four arms, the minimum adjustable

angle is:

b) Effect

Baseline A

Fig.

To shift the holes center line to

the right (clockwise) relative to

baseline A, shift arm 2 to the po-

sition of arm 1 and set it to the

position closest to baseline A.

(Example] For a four arm horn,

the angular shift per segment is

14.4°. The shift to the right is 90°

(14.4 x6)

3.6°

To shift by the same angle in the

opposite direction, use the oppo-

site arm number.

Fig.

For

a six arm horn, turn the arm

counterclockwise and set arm 2

to the position of arm 1. The ad-

justable angle is 60° — (14.4 x 4)

=2.4°.

Arm 3 shift 4.8° to the right, arm

6 shifts 2.4° to the left,and arm 4

shifts 7.2° to the right and left.

Fig. 84

Fig. 85

The following splined hores are optional.

HORN A HORN B HORN C HORN D HORN E HORN F

Futaba

Digital

Proportional

Frequencies

(FOR

U.S.A.)

•The frequency of Futaba digital proportional

sets

can be changed among

bands

(1)~(6)

the 27MHz band only.

•However, a 27MHz band set cannot be changed

to 72MHz band, and vice versa.

•Therefore, always attach the correct frequency

flag to the end of the transmitter antenna.

Each frequency band has its own designated

color, as stated above. The frequency flag is

intended for identification purposes.

•Also change the frequency flag when frequency

is changed.

•Futaba paired crystals are precisely matched.

Always use a Futaba crystal set (transmitter,

receiver) when changing the frequency.

•It is illegal to change crystals of transmitter on

the 72-75MHz bands in the U.S.A.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba FP8SSAP Manual

Product: