535711
18
Zoom out
Zoom in
Previous page
1/78
Next page
18
IMPORTANT: The keys must be pressed firmly
and within 5 seconds. If you make a mistake,
press the ESCbutton and start the sequence
again.
5. Connect the connector of the 7.2V NiMH
rechargeable battery pack to the connector
in the battery compartment.
6. Connect the plug of the 12V power adaptor
to the DC jack in the panel. Route the cable
along the cable track.
7. Fit the Panel to the mounting bracket.
If removing the Control Panel from the wall,
use a flat blade screwdriver to push the clip
towards the wall and push the Panel upwards
and away from the bracket. Before doing
so, again it is advisable to wear ear
defenders as the tamper alarm will sound.
8. If the Control Panel is powered up and left
for approximately 15 minutes before
proceeding to the next step, it may begin
producing a beeping sound and the event
log indicator icon will flash on the Control
Panel because it is searching for the IP
gateway which needs to be power up
Event log icon
To cancel the beeping and indication, press
on the Control Panel followed by .
IP GATEWAY
The IP gateway of the system allows you to
remotely access and control your system over
the internet using the free online web software at
https://GlobalGuard.Friedland.co.uk
or using
the Android/Apple IOS “GlobalGuard” mobile
device App.
The gateway communicates to the Control Panel
wirelessly.
In order to ensure you can remotely access
your system, your internet connection must
be active that the gateway is connected to.
DC Jack
Connector
Cable Track
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland HISK1 GlobalGuard Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland HISK1 GlobalGuard Alarm System in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info