560830
7
Zoom out
Zoom in
Previous page
1/71
Next page
7
5.4 Mounting the siren to the wall
1. Hold the mounting template in position and mark the positions of
the mounting holes. If necessary, use a spirit level.
2. Drill mounting holes (6 mm) into the wall according to the marked
positions.
3. Insert a supplied wall plug into each mounting hole.
4. Install the screws (30 mm) into the top mounting holes, leaving
approximately 9 mm of the screw protruding.
5. Install the mounting plate. Make sure that the holes in the
mounting plate align with the bottom mounting holes.
6. Install the screws (25 mm).
7. Mount the siren to the wall.
CAUTION:
Make sure that the tamper switch is closed when you mount the siren
to the wall. If the tamper switch does not close, the siren will not
operate correctly. If necessary, remove the siren again and insert a
spacer between the tamper switch plunger and the wall to make sure
that the switch closes when you mount the siren to the wall.
CAUTION:
Before testing or operating the siren, leave it in position for at least
24 hours in order to fully charge the battery.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland FGGA04 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland FGGA04 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info