560830
6
Zoom out
Zoom in
Previous page
1/71
Next page
6
3. Press the tamper switch. The indicators in the front lens flash
several times and then continue to flash alternately every 5 seconds
to indicate that the siren is operational.
4. Remove the protective film from the solar panel.
Caution:
Make sure that the solar panel receives sufficient light to maintain
the battery charge.
5. a) If switch 5 is set to ON (siren), the siren will operate without
control panel (single zone).
b) If switch 5 is set to OFF (control panel), the siren will operate
with control panel. For linking the siren to the control panel, refer
to the Installation and Operation Manual for the alarm system and
to the Quick Installation Guide for the siren.
5.3 Adding a new remote control or remote keypad to the siren
If you set up the siren without separate control panel (single zone) for the first time, you must link the siren to a remote keypad
or a remote control before adding other devices. The ID code of the remote control or the remote keypad must be learned by
the siren. The siren can learn up to 6 remote controls or remote keypads.
During setup, the siren will power up in service mode, ready to learn a new remote control or remote keypad. If the siren is in
operating mode, refer to the section “Service mode / Operating mode” to switch to service mode.
Remote control
Remote keypad
1
Press and hold the learn button on the siren for 5 seconds to enter learn mode.
The siren emits one short beep. The indicators in the front lens and the learn indicator flash slowly.
2
Program the ID code:
Press the button.
Enter the 4-digit ID code. Press the button.
The siren emits two short beeps. The indicators in the front lens and the learn indicator flash quickly.
Note:
If the remote control or the remote keypad has already been linked or if the maximum number of 6 remote controls
or remote keypads are linked, the siren will emit one short beep and exit learn mode. The indicators in the front
lens and the learn indicator will go off.
3
Confirm the ID code:
Press the button within 15 seconds.
Enter the 4-digit ID code and press the button
within 15 seconds.
The siren emits three short beeps. The indicators in the front lens and the learn indicator come on for 3 seconds and
go off. The siren returns to service mode.
Note:
If the confirmation signal is not received within 15 seconds, the siren will emit one short beep and exit learn mode.
The indicators in the front lens and the learn indicator will go off.
1. Install the battery cover.
2. Install the screws.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland FGGA04 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland FGGA04 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info