560830

Friedland FGGA04 Series Manual

8
Zoom out
Zoom in
Previous page
1/71
Next page
8
5.5 Adding a new security detector to the siren
In order to communicate with the siren, the ID code of the security detector must be learned by the siren. The siren can learn
up to 12 security detectors (door/window contact detectors or PIR movement detectors).
During setup, the siren will automatically power up in service mode, ready to learn a new security detector. If the siren is in
operating mode, refer to the section “Service mode / Operating mode” to switch to service mode.
Remote control
Remote keypad
1
Press and hold the button for 5 seconds.
Enter the 4-digit ID code. Press and hold the
button for 5 seconds.
The siren emits one short beep. The indicators in the front lens and the learn indicator flash slowly. The siren
remains in learn mode for 30 seconds.
2
Program the ID code:
Press the tamper switch on the security detector.
The siren emits two short beeps. The indicators in the front lens and the learn indicator flash quickly.
Note:
If the confirmation signal is not received within 30 seconds, the siren will exit learn mode. The siren will remain in
service mode.
Note:
If the security detector has already been linked or if the maximum number of 12 security detectors are linked, the
siren will emit one short beep and exit learn mode. The indicators in the front lens and the learn indicator will go
off.
3
Confirm the ID code:
Press the tamper switch on the security detector again within 15 seconds to confirm the ID code.
The siren emits three short beeps. The indicators in the front lens and the learn indicator come on for 3 seconds and
go off. The siren returns to service mode.
Note:
If the confirmation signal is not received within 15 seconds, the siren will emit one short beep and exit learn mode.
The indicators in the front lens and the learn indicator will go off.
5.6 Deleting all devices from the siren
1. Switch the siren into service mode using the remote control or the remote keypad.
2. Remove the siren from the wall.
3. Press and hold the learn button for 10 seconds until the siren emits two long beeps and the learn indicator flashes 5 times.
The ID codes of all linked devices are erased from memory. The siren remains in service mode.
5.7 Service mode / Operating mode
If you install the siren for the first time, it will automatically power up in service mode. Before testing or operating the siren, it
must be switched into operating mode.
If you use the siren with a control panel, refer to the Installation and Operation Manual for the alarm system.
If you use the siren without a control panel, use the remote control or the remote keypad:
Remote control
Remote keypad
1
Press and hold the button for 5 seconds.
Enter the 4-digit ID code. Press and hold the
button for 5 seconds.
To switch from operating mode into service mode:
If you press the button (remote control) or the button (remote keypad), the device will transmit the
disarm signal and the siren will emit two normal beeps. The system is disarmed.
If you press and hold the button (remote control) or the button (remote keypad) for 5 seconds, the siren
will emit two short beeps followed by one long beep. The indicators in the front lens and the learn indicator will
flash together with the beeps. The system will return to service mode.
Switching from service mode into operating mode:
If you press the button (remote control) or the button (remote keypad), the device will transmit the
disarm signal. The siren will not respond to the disarm signal, as it is still in service mode.
If you press and hold press the button (remote control) or the button (remote keypad) for 5 seconds, the
siren will emit one long beep followed by two short beeps. The indicators in the front lens and the learn indicator
will flash together with the beeps. The siren will return to operating mode in a disarmed condition.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland FGGA04 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland FGGA04 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info