560830
5
Zoom out
Zoom in
Previous page
1/71
Next page
5
5 Installation
5.1 Configuring the siren
1. Remove the screws.
2. Remove the battery cover.
3. Set switch 5 to the required position.
Without control panel
(single zone)
ON (siren)
With separate control panel
OFF (control panel)
4. Set switch 1 to limit the maximum period for which the external
siren will sound.
Without control panel
(single zone)
ON (3 min) / OFF (1 min)
With separate control panel
ON (10 min) / OFF (3 min)
5. Set switch 2 to enable or disable the anti-jamming detection when
using the siren without control panel.
ON
enabled
OFF
disabled
6. Set switch 3 to enable or disable the siren during an alarm.
ON
enabled
OFF
disabled
7. Set switch 4 to enable or disable the beeps when the siren receives
signals from the remote control or the remote keypad.
ON
enabled
OFF
disabled
5.2 Powering up the siren
Note: If you install the siren for the first time, it will automatically power up in service mode. You cannot switch the siren out of
service mode and into operating mode until at least one remote control or remote keypad is linked to it.
1. Connect the initial power-up battery to the connection terminal.
2. Connect the rechargeable main battery to the connection terminal.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland FGGA04 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland FGGA04 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info