779780
40
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
44
the chain bar. Lubrication is possible during work, with the engine switched off.
m CAUTION
Wear heavy duty work gloves when handling the bar and chain.
Most guide bar problems can be prevented merely by keeping the chainsaw well
maintained. Insufficient guide bar lubrication and operating the saw with a chain
that is TOO TIGHT will contribute to rapid bar wear. To help minimize bar wear, the
following guide bar maintenance procedures are recommended.
m CAUTION
Always wear protective gloves during maintenance operations.
Do not carry out maintenance when the engine is hot.
Turning the chain bar
The bar should be reversed every 8 working hours to ensure uniform wear.
Remove the complete side cover,chain bar and chain by loosening the bar fastening
wheel (14) completely.
Keep the bar groove and lubrication hole clean (Fig. 28).
Check the bar rails frequently for wear and, if necessary, remove the burrs and
square-up the rails using a flat file (Not supplied).
Remount the the chain bar (reversed side), chain and side cover.
m CAUTION
Never fit a new chain to a worn chain bar.
CHAIN MAINTENANCE
Chain sharpening
Chain sharpening requires special tools to ensure that cutters are sharpened at the
correct angle and depth. For the inexperienced chainsaw user, we recommend that
the saw chain be professionally sharpened by the nearest professional Service Cen-
tre. If you feel comfortable sharpening your own saw chain, special tools are availa-
ble from the professional Service Centre.
Sharpen the chain using protective gloves. After sharpening, the cutting links must
all have the same width and length.
Maintenance and servicing
40


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info