Manual Ferrex FPCS46 E1 (page 42 of 50) (English)

779780

Zoom out

Zoom in

1/50

Kapitelüberschrift

CHAIN MAINTENANCE (CONTINUED)

Chain tension

Check the chain tension frequently and adjust as often as necessary to keep the

chain snug on the bar, but loose enough to be pulled around by hand.

Breaking in a new saw chain

A new chain and bar will need chain readjustment after as few as 5 cuts. This is

normal during the break-in period, and the interval between future adjustments will

begin to lengthen quickly.

m CAUTION

Never have more than 3 links removed from a loop of chain.

This could cause damage to the sprocket.

Re-assembly of the chain bar and chain to the engine unit

m CAUTION

Do not start the engine until the saw is fully assembled.

m CAUTION

Wear protective gloves at all times when handling the chain.

Fit the chain bar

To ensure that the bar and the chain are supplied with oil, USE ONLY THE ORIGINAL

BAR.

The oiling hole (Fig. 29/pos. G) must be kept clear of dirt and any build-up of resi-

due.

1. Make sure the chain brake lever (Fig. 5/pos. 3) is pulled back into the DISEN-

GAGED position.

2. Turn the chain tensioning wheel (Fig. 30/pos. 12) in an ANTI-CLOCKWISE DIREC-

TION until the projecting pin is at the end of its sliding path in the direction of

the clutch and gear wheel (Fig. 30).

3. Fit the open end of the chain bar over the bar pins (Fig. 29/pos. H).

Maintenance and servicing

How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex FPCS46 E1 Manual

Product: