779780
39
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
43
NOT USE ANY OTHER TOOLS.
5. Clean the spark plug with a copper wire brush and refit it, or fit a new spark plug.
Carburettor and idling speed settings
m NOTICE
Settings on the carburettor may only be made by authorised customer service per-
sonnel.
How to remove the chain or chain bar for replacement maintenance & clean-
ing
1. Make sure the chain brake lever is pulled back into the DISENGAGED position
(Fig. 5).
2. Extend the lever on the bar fastening wheel (Fig. 2/pos. 14) and completely un-
screw it ANTI-CLOCKWISE.
Then remove the complete side cover.
Chain bar maintenance (Fig. 28)
Regular lubrication of the chain bar (guide rail for the chain and teeth) is essential.
The chain bar needs the maintenance described in the following section in order for
the saw to work at an optimum level of performance.
m NOTICE
The sprocket tip on your new saw has been pre-lubricated at the factory. Failure to lu-
bricate the guide bar sprocket tip as explained below will result in poor performance
and seizure, voiding the manufacturer’s warranty.
To lubricate the sprocket tip
If the saw is used intensively it will be necessary to lubricate the guide bar sprocket
tip (E) regularly (once a week).
To do this, first thoroughly clean the 2 mm hole (F) at the tip of the guide bar, and
then press in a small amount of multi-purpose grease.
Multi-purpose grease and grease guns are available in specialty retail trade.
m NOTICE
The saw chain does not have to be removed in order to lubricate the sprocket tip of
Maintenance and servicing
39


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info