779780

Ferrex FPCS46 E1 Manual

31
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
35
Felling trees - only with relevant training
m CAUTION
Watch out for broken or dead branches which may fall down during sawing and
which could cause severe injuries. Do not saw close to buildings or power lines if you
do not know in which direction the felled tree will fall. Do not work at night because
you can see less well, or during rain, snow and storms because the direction in which
the tree will fall cannot be anticipated.
• Plan your work with the chainsaw in advance.
• The working environment around the tree should be cleared so you have secure
footing.
• The machine operator should always be positioned at a higher level in the work-
ing area because the tree will probably roll or slide down after felling.
The following conditions can influence the tree‘s falling direction:
• Wind direction and speed
• Leaning of the tree - The leaning direction cannot always be recognised
because of uneven or sloping ground. Determine the leaning direction of the
tree using a plumb line or a level.
• Branches growing (and therefore weight) only on one side
• Surrounding trees or obstacles
Look out for destroyed or decayed parts of the tree. If the trunk is decayed, it can
suddenly break and fall on you. Make sure there is sufficient space for the falling tree.
Keep a distance of 2½ tree lengths to the next person or other objects. The sound of
the motor can drown out warning cries.
Remove dirt, stones, loose bark, nails, brackets and wire from the sawing area.
m Ensure you have a free escape route (Fig. 14)
Position 1: Escape route
Position 2: Falling direction of the tree
Felling of large trees (from 15cm diameter) - only with relevant training
The undercutting method is used for felling large trees. For this, a wedge is cut out
from the side of the tree according to the required falling direction. After the drop-
ping cut has been made on the other side of the tree, it will fall in the direction of the
wedge cut.
Operating Instructions
… 31 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info