779780

Ferrex FPCS46 E1 Manual

30
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
34
Operating Instructions
m WARNING
Beware of the following:
• Rotary recoil (Fig. 12)
A = Recoil distance / B = Recoil reaction zone
• Impact/Jamming recoil and pulling reactions (Fig. 13)
A = Pull / B = Solid objects / C = Push
• To prevent pulling reactions, place the wood you wish to cut against the spiked
bumper (11). Use the spiked bumper as a pivot point during cutting.
• Make sure that the chainsaw cannot swing through at the end of the cut due to
its own weight. If it is no longer supported in the cut, hold something appropri-
ate against it.
m Important notices
1) Turn off the motor if the saw comes in contact with foreign objects. Check the
saw and, if applicable, repair it.
2) Protect the chain from dirt and sand. Even small quantities of dirt can quickly
make the chain blunt and increase the risk of kickback.
3) Start by cutting up smaller logs to practise in order to get a feel for the device,
before attempting difficult tasks.
4) Activate the throttle at maximum, before starting sawing.
5) Press the casing of the chainsaw against the log when starting sawing.
6) Run the device at full throttle throughout the whole sawing process.
7) Let the saw do the work. Only use slight downwards pressure.
8) Release the throttle as soon as you have finished your work so the motor runs
idle. If you let the machine run at full throttle without load, there will be
unnecessary wear and tear.
9) So that you do not lose control of the device after the chain exits the wood, you
should not apply any pressure to the saw towards the end of the cut.
10) Turn off the device before putting it down.
11) Check after starting the idle setting. The cutting blade must be stationary
during idling.
Operating Instructions
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info