Manual Ferrex FPCS46 E1 (page 29 of 50) (English)

779780

Zoom out

Zoom in

1/50

Kapitelüberschrift

Starting the engine when warm

(The equipment has been idle for less than 15-20min)

Fill up the fuel tank with the relevant mixture of petrol and oil (Fig. 7), and also top

up the chain oil (Fig. 7). See the section ‘Fuel and oil’.

1. Activate the chain brake before starting (Fig. 6/pos 3).

2. Make sure the stop switch is in the ‘I’ (ON) position (Fig. 8 / pos 19).

3. Set the equipment down on a ﬁrm level ﬂat surface. Hold the saw ﬁrmly as

shown. (Fig. 10) Beware of moving chain!

4. Pull the starter handle rapidly 6 times (Fig. 10/pos. 6). The engine should start.

If the equipment does not start after 6 tugs, repeat the steps of the procedure

for starting the engine from cold.

Each time before use, check the following:

- That there are no leaks in the fuel system.

SWITCHING OFF THE ENGINE

Emergency Stop procedure:

To stop the engine in an emergency, activate the Chain brake lever / front hand

guard (Fig.6/pos. 3). This will immediately stop the chain. Then switch the stop

switch (Fig. 8/pos. 19) to ‘0’ Stop.

Normal procedure:

Let go of the throttle lever (Fig. 11/pos. 18) and wait until the engine has changed to

idling speed. Then set the stop switch (Fig. 11/pos.19) to ‘0’ Stop.

Practice all the work steps with the engine switched off before you start to use the

equipment.

m CAUTION

When idling, the saw chain (2) should not move. If the saw chain (2) moves, you need

to adjust the idling speed!

Operation

How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex FPCS46 E1 Manual

Product: