779780
27
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
31
6. FUEL MIXING TABLE
Mixing Procedure: 40 parts petrol to 1 part 2-stroke oil.
Petrol 2-stroke oil
1 litre 25 ml
5 litres 125 ml
m CAUTION
Never start or operate the saw unless the bar, chain and chain brake lever / front
hand guard are properly installed.
1. Fill the fuel tank with correct fuel mixture (Fig. 7/pos. 8).
2. Fill the oil tank with chain oil (Fig. 7/pos. 10).
3. Be certain the chain brake is activated before starting the unit (Fig. 6/pos 3).
Once you have filled the chain and oil tank, tighten the tank cover securely by
hand.
Do not use any tools to do so.
7. IDLE SPEED ADJUSTMENT
If the cutting attachment still rotates in idle speed, contact Authorized Service
Centers for correct idle speed adjustment.
Note: When the engine is idling the cutting attachment must not rotate under
any circumstances!
Operation
Please note that the statutory regulations governing noise abatement may differ
from one location to another.
Each time before use, check the following:
- That there are no leaks in the fuel system.
- That the equipment is in perfect condition and that the safety devices and
cutting devices are complete.
- That all screws are securely fastened.
- That the spiked bumper (Fig. 1/pos. 11) is securely fastened. If you need to tighten
it, use the allen key (Fig. 1/pos. 24).
- That all moving parts move smoothly.
Set up/Operation
27


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info