779780
25
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
29
Then slacken the chain tension by slowly turning the chain tensioning wheel
(Fig. 2/pos. 12) in a ANTI-CLOCKWISE DIRECTION and then pull the chain back and
forth on the bar (Fig. 4). Continue until the chain can be moved smoothly but is
still closely seated (Fig. 3/pos. X2). Increase the tension by turning the chain ten-
sioning wheel in a CLOCKWISE DIRECTION.
B When the saw chain is correctly tensioned, hold the tip of the bar upwards and
completely tighten the bar fastening wheel (Fig. 2/pos. 14).
m A new saw chain stretches, requiring adjustment after as few as 5 cuts. This is
normal with a new chain, and the interval between future adjustments will length-
en quickly.
m If the saw chain is TOO LOOSE or TOO TAUT, the drive wheel, chain bar, chain and
crank shaft bearing will suffer premature wear. Fig. 3/pos. X2 shows the correct
tension (when cold) and Fig. 3/pos. X3 shows the tension (when warm). Fig. 3/pos.
X1 shows a chain that is too loose.
3. CHAIN BRAKE MECHANICAL TEST
Your chainsaw is equipped with a chain brake that reduces the possibility of injury
due to kickback. The brake is activated if pressure is applied against the brake lever
when, as in the event of kickback, the operator’s hand strikes the lever. When the
brake is actuated, chain movement stops abruptly.
m WARNING
The purpose of the chain brake is to reduce the possibility of injury due to kickback;
however, it cannot provide the intended measure of protection if the saw is oper-
ated carelessly. Always test the chain brake before using your saw and periodically
while on the job. (See below for details of how to perform a test of the mechanical
brake).
4. TO TEST CHAIN BRAKE
The chain brake is DISENGAGED (chain can move) when the BRAKE LEVER (3) IS
PULLED BACK AND LOCKED shown in Fig. 5.
The chain brake is ENGAGED (the chain is locked) when the brake lever (3) is
pulled forward (shown in Fig. 6). It should not be possible to move the chain (Fig.
4).
Set up
25


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info