779780
24
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
28
Set up
Before starting the equipment
This chainsaw is supplied ready-assembled.
Check that all moving parts move smoothly before you start using the equipment.
Check that all screws are securely fastened and also check all the safety devices.
Before adding fuel and starting the chainsaw, you must check the tension of the
chain in case some of the fixings have come loose in transit.
Re-tension the chain, if this is necessary.
1. THIS CHAINSAW IS SUPPLIED READY-ASSEMBLED.
Remove the chain guard (20) before use.
2. IF IT IS NECESSARY TO RE-TENSION THE CHAIN
Adjusting the chain tension
The correct tension of the saw chain is extremely important and must be checked
before starting and periodically during all sawing work. If you take time to ad-
just the saw chain correctly, you will be able to make better cuts and the life of the
chain will be prolonged.
Undo the bar fastening wheel (Fig. 2/pos. 14) by 1/2 of a turn ANTI-CLOCKWISE.
Hold the tip of the chain bar upwards and turn the chain tensioning wheel (Fig.
2/pos. 12) in a CLOCKWISE DIRECTION in order to increase the chain tension. If you
turn the chain tensioning wheel an ANTI-CLOCKWISE DIRECTION, the chain tension
will be reduced. Check that the chain is seated around the entire chain bar (Fig.
3/pos. X3).
After making the adjustment and with the tip of the bar still upwards, tighten
the bar fastening wheel (Fig. 2/pos. 14). The chain is correctly tensioned when it
is closely seated and can be pulled right around by hand, when the chain brake
lever (3) is released.
m WARNING
Wear high-strength gloves at all times when handling or adjusting the saw chain.
m If the chain is hard to turn around the chain bar or jammed, it is too tightly ten-
sioned. Make the following small adjustments:
A Undo the bar fastening wheel (Fig. 2/pos. 14) by 1/2 of a turn ANTI-CLOCKWISE.
Set up
24


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info