779780

Ferrex FPCS46 E1 Manual

33
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
37
m CAUTION
Do not stand on the log you are currently cutting. The log could roll away and you
may lose your footing and control of the device. Do not carry out sawing work on
sloping ground.
Important notices
• Only ever saw one log or branch.
• Be careful when cutting split wood. You may be hit by sharp pieces of wood.
• Cut small logs or branches on a sawhorse. When cutting logs, no other person
must hold on to the log. Do not secure the log with your leg or foot.
• Do not use the saw in areas where logs, roots and other parts of the tree are en-
tangled. Pull the logs to a free area and cut the freed logs first.
Different cuts for log division (Fig. 17)
m CAUTION
If the saw is jammed in a log, do not pull it out with force. You may lose control of the
device and suffer severe injuries and/or damage the saw.
Stop the saw and drive a plastic or wooden wedge into the cut until the saw can be
pulled out easily. Restart the saw and carefully continue with the cut. Never start the
saw when it is jammed in a log.
Topping (Fig. 18, Pos. 1)
Topping starts at the upper side of the log where you hold the saw against the log.
Only use slight downwards pressure for topping.
Undercut (Fig. 18, Pos. 2)
Start the undercut on the underside of the log and hold the top edge of the saw
against the log. Only use slight upwards pressure for the undercut. Hold the saw se-
curely to control the device. The saw will push backwards (in your direction).
m CAUTION
Never hold the saw the wrong way round for an undercut. You do not have control of
the device in this position. Always make the first cut on the compression side of the
log. The compression side of the log is where the pressure of the log‘s weight is con-
centrated.
Operating Instructions
… 33 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info