779780
35
Zoom out
Zoom in
Previous page
1/50
Next page
Kapitelüberschrift
39
Trimming
Do not start trimming the tree before it has been felled. Only then can you carry
out the trimming safely and properly.
Leave larger branches underneath the felled tree and use them as a support
while you continue working.
Start at the foot of the felled tree and work your way up to the top. Remove
smaller parts of the tree with one cut.
Make sure that the tree is always between you and the saw.
Remove larger, supporting branches using the method from section “Log division
without supports“.
Always remove small freely suspended parts of the tree with a top cut. They may
fall into the saw or trap it if you use an undercut.
Pruning (Fig. 22)
m CAUTION
Prune branches only at or below shoulder height. Never cut branches above shoul-
der height. Leave that kind of work to a professional.
For the first cut (Pos. 1), cut 1/3 of the way into the lower part of the branch.
Then cut all the way through the branch with the second cut (Pos. 2). The third
cut (Pos. 3) is a top cut with which you separate the branch from the trunk at a
distance of 2.5 to 5cm.
Operation Instructions
35


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-fpcs46-e1

Reset search

  • How do I download the manual without some scumbag company telling me I have to download their version of PDF????? Submitted on 28-3-2024 at 02:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FPCS46 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FPCS46 E1 in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info