734927
15
Zoom out
Zoom in
Previous page
1/34
Next page
Safety
13
a complete stop.
The rotating fitted tool could come into contact with
the surface of the base and you could lose control of the power tool.
m) Never allow the power tool to run while you are carrying it.
Your
clothing could accidentally come into contact with the rotating fitted
tool and the fitted tool could be driven into your body.
n) Clean the vents of your power tool regularly.
The motor fan will
draw dust into the housing; if a large amount of metal dust
accumulates, it could pose electrical hazards.
o) Do not store the power tool near flammable materials.
Sparks
could ignite these materials.
p) Do not use any fitted tools that require liquid coolants.
Using
water or other liquid coolants could cause an electrical shock.
Special safety notes on the risk of kickback
Kickback is the sudden reaction caused by a rotating fitted tool (e.g. grinding disc,
sanding pad, wire brush, etc.) getting caught on something or jamming. The rotating
fitted tool shall come to an abrupt stop if it catches or jams. An uncontrolled power tool
is thus propelled in the direction opposite of the rotation of the fitted tool at the point
where it jams. If a grinding wheel catches or locks in the work piece, for example, the
edge of the grinding wheel inserted in the work piece could catch causing the
grinding wheel to break out or kick back. The grinding wheel will then jerk towards or
away from the operator depending on the direction in which the wheel is rotating at
the point where it jams. Grinding wheels can also break as a result.
A kickback is the result of wrong or improper use of the power tool. It can be prevented
by taking suitable precautions like those described below.
a) Hold the power tool firmly and position your body and arms so
that you can control any kickback forces. Always use the
supplementary handle to have the greatest degree of control
over kickback forces or reaction torques during start-up.
The
operator can take suitable precautions to control kickback forces and
reaction torques.
b) Never position your hand near rotating fitted tools.
The fitted tool
may move over your hand during kickback.
c) Avoid placing your body in the area where the power tool may
recoil in the event of kickback.
The kickback propels the power tool
in the direction opposite the movement of the grinding/cutting disc
at the point where it jams.
d) Be very cautious when working around corners, sharp edges,
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info