734927
16
Zoom out
Zoom in
Previous page
1/34
Next page
Safety
14
etc. Ensure that the fitted tools do not kick back from the
workpiece and get jammed in it.
The rotating fitted tool tends to
catch around corners, sharp edges or in the event of impacts. This will
result in a loss of control or a kickback.
e) Do not use a chain saw blade or a serrated saw blade.
Such fitted
tools often cause kickback or a loss of control over the power tool.
Special safety notes for grinding and cutting
a) Use only grinding/cutting discs approved for your power tool
and the protective cover provided for these grinding/cutting
discs.
Grinding/cutting discs not intended for the power tool cannot
be adequately shielded and are dangerous.
b) Offset grinding/cutting discs must be installed so that their
grinding surface does not stick out over the protective cover
edge.
An improperly installed grinding/cutting disc sticking out over
the protective cover edge cannot be sufficiently covered.
c) The protective cover must be securely attached to the power tool
and set to the highest level of safety so that the smallest part of
the grinding tool openly faces the operator.
The protective cover
helps protect the operator from fragments, accidental contact with
the grinding tool, and sparks that could ignite clothing.
d) Grinding tools may be used only for the recommended
applications. For example: Never grind using the side of a cutting
disc.
Cutting discs are intended for removing material using the edge of
the disc. Forces acting on the side of the grinding tool could shatter it.
e) Always use an undamaged clamping flange of the correct size
and shape for the grinding/cutting disc of your choice.
Suitable
flanges support the grinding/cutting disc and reduce the risk of the
grinding/cutting disc breaking. Cutting-disc flanges may differ from
the flanges for other grinding discs.
f) Do not use worn grinding/cutting discs from larger power tools.
Grinding/cutting discs for larger power tools are not designed to
handle the higher speeds of smaller power tools and could break as a
result.
Additional special safety notes for cutting
a) Avoid jamming the cutting disc or applying too much pressure
to it. Do not perform any excessively deep cuts.
Overloading the
cutting disc will increase the stress on it and make it susceptible to
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info