734927
17
Zoom out
Zoom in
Previous page
1/34
Next page
Safety
15
canting or jamming, which could cause it to kick back or the grinding
tool to break.
b) Avoid the area in front of and behind the rotating cutting disc.
If
you move the cutting disc away from you in the workpiece, the power
tool and rotating disc can be hurled directly towards you if kickback
occurs.
c) If the cutting disc catches or if you stop working, switch off the
device and hold it steady until the disc has come to a full stop.
Never attempt to pull the cutting disc out of the cut while it is still
rotating. Otherwise this could result in kickback.
Determine and
rectify the cause for it catching.
d) Do not switch the power tool back on while it is still in the work
piece. First allow the cutting disc to reach its full speed before
you carefully continue cutting with it.
Otherwise, the disc could
catch, jerk out of the workpiece or cause a kickback.
e) Support boards or large work pieces to rule out any risk of
kickback caused by the cutting disc catching.
Large workpieces
could bend under their own weight. The workpiece must be
supported on both sides of the disc, both near the separating cut and
along the edge.
f) Be particularly careful when carrying out ‘plunge cuts’ in existing
walls or other areas where you do not have a complete overview.
The plunging cutting disc could cut into gas or water lines, electrical
lines or other objects, resulting in kickback.
Safety notes for grinding
a) Do not sand paints that contain lead. Determine whether the paint
you intend to sand contains lead before beginning work. Dust from
paints containing lead may cause lead poisoning.
b) A special test or a commercial painting contractor can determine
whether a paint contains lead. If in doubt, you should wear a special
dust mask to protect you from fine particles containing lead. Consult a
specialist for information on suitable dust masks.
c) Grinding coats of paint containing lead and metals could produce
hazardous or poisonous dust. Coming into contact or inhaling the
dust may pose a risk to the operator or nearby persons. Wear suitable
protective equipment to protect yourself and nearby persons from
coming into contact or inhaling this dust. Normal dust masks do not
provide proper protection.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info