734927
14
Zoom out
Zoom in
Previous page
1/34
Next page
Safety
12
a flange, the hole diameter of the fitted tool must match the
mounting diameter of the flange.
Fitted tools not firmly attached
to the power tool will rotate unevenly, vibrate significantly and may
result in a loss of control.
g) Do not use damaged fitted tools. Inspect the fitted tools before
each use. For example, check grinding discs for cracks and chips,
the sanding pads for cracks, wear and tear or excessive wear,
and the wire brushes for loose or broken wires. If the power tool
or fitted tool falls down, check whether it is damaged or use a
fitted tool that is not damaged. If you have checked the fitted
tool and fitted it, ensure that you and nearby persons are not
in line with the rotating fitted tool and let the device run at full
speed for one minute.
In most cases, damaged fitted tools will break
during this test period.
h) Wear personal protective gear. Depending on the application,
wear full facial protection, eye protection or protective goggles. If
appropriate, wear a dust mask, ear protection, protective gloves
or a special apron to keep small grinding particles and other
material particles away from you.
Your eyes should be protected from
floating debris produced in connection with different applications. The
dust or protective breathing mask must filter out dust produced during
the respective application. If you are exposed to excessive noise, you
could suffer hearing loss.
i) Make sure that other persons are at a safe distance to your work
area. Anyone entering the work area must wear personal protective
gear.
Fragments of the work piece or broken fitted tools could be
projected and inflict injury both within and outside of the direct work
area.
j) Only hold the power tool by the insulated handle surfaces when
performing work where there is a risk of the fitted tool being
used coming into contact with hidden power supply lines.
Contact
with a live wire may make exposed metal parts of the power tool live
and could give the operator an electric shock.
k) Keep the mains cord away from rotating fitted tools.
If you lose
control of the device, the mains cord could be severed or get caught
and your hand or arm could come into contact with the rotating fitted
tool.
l) Never set the power tool down before the fitted tool has come to
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info