734927
13
Zoom out
Zoom in
Previous page
1/34
Next page
Safety
11
b) Only use the rechargeable batteries designated for use in power
tools.
Using other rechargeable batteries may result in injury and a
risk of fire.
c) Keep the unused rechargeable battery away from paper clips,
coins, keys, nails, screws or other small metallic objects that
could bridge the contacts.
A short circuit between the contacts of
the rechargeable battery could result in burns or fire.
d) If used improperly, liquid may leak out of the rechargeable
battery. Avoid coming into contact with it. Rinse with water in the
event of accidental contact.
If liquid comes into contact with your
eyes, also seek medical attention. Fluid leaked from the rechargeable
battery may cause skin irritations or burns.
Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
Safety notes for using the grinder
General safety notes for grinding and cutting
a) This power tool is to be used as a grinder and cutting-off
machine. Observe all safety notes, instructions, illustrations and
data provided with the device.
Failure to observe the instructions
provided below may result in electric shock, fire and/or serious injury.
b) This power tool is not suitable for sanding, working with wire
brushes, or polishing.
Use of the power tool for purposes for which it
is not intended can result in risks and injuries.
c) Do not use any accessories which the manufacturer has not
specifically designed and recommended for this power tool.
Firmly
attaching accessories to your power tool is no guarantee for safe use.
d) The permissible speed of the fitted tool must be at least as high
as the maximum speed specified on the power tool.
Accessories
that rotate faster than permissible may break and be projected.
e) The fitted tool’s outer diameter and thickness must comply with
your power tool’s measurements.
Incorrectly dimensioned fitted
tools can not be adequately shielded or controlled.
f) Fitted tools with threaded inserts must fit precisely onto the
thread of the grinding spindle. For fitted tools installed using
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info