632845

Ferm BLM1002 - MD500 Manual

12
Zoom out
Zoom in
Previous page
1/38
Next page
Ferm 65
Besides, in the table - second column- is mentioned how
the starting size by means of the same change wheels can
be adjusted.
Tab.5
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the benchlathe
LUBRICATING SCHEDULE
Fig.18
Tab.6
Maintenance of the machine happens for preventing rust
and wear end tear. The maintenance consists mainly of
clearing and oiling. It certainly is not sufficient to handle
only the oil-syringe. Chips and waste of the machine
parts have to be removed very regularly, often more
times during turning. Otherwise there is the possibility it
lands between moving, slipping and turning parts. For
this reason chips bulldozers on the cross slide have been
placed. watch fig.18.
Part
Roller bearing
main shaft
Bearings and cog
wheels of speed
reduction axles in
the headstock (2)
Bearings V-belt
roller and axle
mediate
Thrust bearing
mission (13)
Change gear
wheels (12)
Gear wheels lock
with gear
rack(15)
Gear wheel
bearings lock
case, lock nut
mechanism (17)
Transmission/
starting axle (18)
Sliding surfaces
off the bed (3)
Support spindles
(8, 16)
All ball nipples
the (5,6,9,14 and
20)
Felt in chips
bulldozers (4)
All remaining
white parts
without cover
layer
Time/interval
After first 10 days
after 20 days and
then each 60 days
Annually
Annually
At change or
Weekly
Weekly
Daily
The same
The same
The same
The same
The same
Weekly
Lubricant
Transmission oil
SAE90:
till sight-glass is half
full(1) or lowest cog
wheels just in the
oil
The same
Universel gear
The same
Fine lubricating oil
The same
The same
The same
The same
The same
Vaseline
Inch
n/inch A B C
48 70 79
40 70 84 79
32 105 98 49
2498 40
20708440
16 56 84 40
14 49 105 50
12 49 98 40
11 49 105 39
8 50 105 28
12 Ferm
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BLM1002 - MD500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BLM1002 - MD500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info