485594

Fagor CAT 44NG Manual

26
Zoom out
Zoom in
Previous page
1/104
Next page
During the cleaning process the display
shows the following indications alter-
nately:
•«CLEANING 1 <1-6>»:
The program carries out 5 cleaning
cycles. The pauses enable the cleaning
solution to take effect. The cleaning
cycles are counted off in the display.
•«IN PROCESS»
The bar indication in the bottom line
increases with the advance of the
pause duration.
In the event of a power failure or
interruption, the program must be
restarted!
The cleaning process takes ca.
8 minutes. Then the following is shown
in the display:
•«
•
•
•
•
EMPTY WASTE CONTAINER -
PRESS OK»
«WAIT»
Empty and replace the container. Then
press the „OK“ key (Fig. 3, g).
•«REFILL WATER – PRESS OK»
Remove the water tank, refill water
and replace. Then press the „OK“ key
(Fig. 3, g).
•«CLEANING COMPLETED»
When this message appears, the clean-
ing program is ended.
Turn the bean container to the desired
position. The machine is now ready for
use and in the status of the last
selected coffee mode.
After running the cleaning program,
you are advised to throw away the first
cup of coffee from the machine.
13.7 Running the descaling programme
GB
The descaling programme allows a
simple and effective descaling of the
appliance. You should descale the
appliance at regular intervals, latest,
however when you are informed by the
display indication “CARRY OUT DESCA-
LING“. The descaling process is carried
out in 2 phases, takes several minutes and
should not be interrupted.
The frequency of descaling depends on
how hard the water is in your region.
Please do not forget to find out the water
hardness and adjust the corresponding
hardness degree on the appliance. Please
read chapter “Determining and adjusting
the water hardness”.
Use only limescale removal products
recommendes by FAGOR. You may obtain
them from our authorised distributor
network or through our customer care
helpline.
Method phase 1: descaling
1. Press button f “Menu “. Subsequently
press button c “Scroll “ or button d “Scroll
“ until the menu point “DESCALE“ ppears.
2. Confirm the menu point with button g
“OK “. If you press button g “OK “ once
more you will receive instructions via the
display how you have to prepare the
descaling. Follow the instructions on
the display:
• REFILL <250ml> WATER changes with 125ml
DESCALER IN WATERTANK – PRESS OK.
3. Pull out the water tank. Put 125ml
descaler agent into the water tank. Then
add 250ml water into the water tank by
filling the empty descaler bottle twice
with fresh water (see Illustration ). Replace
the water reservoir – press button g "ok “,
the descaling program starts. Fig. 34
«PUSH IN WASTE CONTAINER»
Replace the container.
«WAIT»
The brewing unit is positioned.
«WASTE CONTAINER UNDER OUTLET»
Place the waste container under the
outlet again.
«PRESS OK. CLEANING 6 <1-6>»
Rinsing phase.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor CAT 44NG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info