Manual Fagor CAT 44NG (page 28 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

14 What do I do, if ...

13.8 Cleaning the steam valve

• ... coffee-making is interrupted and

«REFILL WATER» is displayed?

– The water tank is empty: Refill the

water tank and press the „OK“ key

(Fig. 3, g).

• ... coffee-making is interrupted and

the indications «CLEAN

BREWING UNIT» and

«SWITCH OFF UNIT» are shown

alternately?

– Brewing unit is overfilled: Carefully

clean the brewing unit; see

„Cleaning the Coffee-making Unit“.

– In powder mode spoon in a max. of 2

• ... the machine can no longer be

operated and «WASTE CONTAI-

NER» is indicated?

– Container is full: Empty container

and clean thoroughly; see „Emptying

the Container“.

– In powder coffee mode, fill in max. 1

measuring spoon of coffee powder.

– Adjust to a lower grinding level: see

“Changing grinding quantities”.

– Check the ejection lever: see

Cleaning the brewing unit”

Clean the frothing unit as well as the

steam valve after frothing or heating

up milk. If the steam valve allows only

a reduced amount or no steam or hot

water to pass through, we recommend

decaling in addition.

Caution! Risk to health through milk

residue on the frothing unit and

steam valve! Contamination through

dried milk on the frothing unit as well

as the steam valve is a breading

ground for bacteria. Keep these parts

of the appliance clean at all times.

Caution! Risk of burning on the

frothing unit and steam valve! The

frothing unit as well as the steam valve

get very hot during the frothing

of milk or the preparation of hot water,

and can cause burns. Allow these

parts of the appliance to cool down

before starting cleaning. Only hold the

frothing unit by the black cap.

Method:

Remove the frothing unit and rinse off

the milk residue under flowing water.

Subsequently wipe the steam valve

with a damp cloth. Fig. 43

Clean the air suction opening of the

frothing unit if blocked by poking the

clogged opening carefully with a

pointed needle. Fig. 44

Now unscrew the outlet valve from the

steam valve. For this, use the measu-

ring spoon P with the integrated took

function. Fig. 45

Clean the outlet valve by poking the

clogged opening carefully with a

pointed needle.

Then rinse thoroughly and check that

the valve is free. Fig. 46

To clean the steam valve, place a

container under the steam valve. Turn

rotary switch D “Hot water/steam” into

position and allow hot water to pass

through briefly without the screwed-

on outlet valve. This rinses out any

remaining contamination from the

steam valve.

Now screw the cleaned outlet valve

back onto the steam valve using the

measuring spoon P. Fig. 47

Then again place the frothing unit

onto the steam valve and lock. Fig. 48

Caution, protection of the applian-

ce! A clogged steam valve can damage

the appliance! If the steam valve still

does not let through any steam or hot

water following cleaning of the outlet

valve, the device must be descaled.

Corresponding information can be

found in the chapter “Starting the

descaling programme”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: